PRODUCT DESCRIPTION:
Sill-Flow LP (Low Profile) is an extruded, closed cell polyethylene foam wedge (see diagram) specifically designed for use in metal sill pan flashing assembly.

Sill-Flow provides a positive sloped substrate at sills of door and window openings.

Basic Uses:
To assist with the flow of water by providing a sloped substrate at sills of door and window openings when used in conjunction with waterproofing membrane and metal sill pan.

Color: White and Black

Sizes:
   Sill-Flow LP X2

• 5" wide, 84" long

• 5" wide, 54" long

• 6" wide, 84" long

• 6" wide, 54" long

• 2 lbs. Density

   Sill-Flow LP X4

• 5" wide, 84" long

• 5" wide, 54" long

• 6" wide, 84" long

• 6" wide, 54" long

• 4 lbs. Density

INSTALLATION:
Sill-Flow may be installed on the sills of the openings by using low-solvent construction adhesive or secured by screws or nails.

When the window setting depth is >5" align the thick edge of Sill-Flow with the interior plane of the window frame. If the window setting depth is <5", align the thin edge of Sill-Flow with the exterior plane of the drainage plane.

Staple, tack or bond Sill-Flow in place. Travel tack aerosol adhesive may be used to bond in place. Sill-Flow pieces may be butted together in an installation as long as the cuts are straight.

Subsequently waterproofing sheet membrane and metal sill pan may be installed over Sill-Flow.

For window settings of 5" depth, Sill-Flow protruding beyond the interior plane of the window setting may be trimmed off with a sharp utility knife after installation of the metal sill pan.

LIMITATIONS:

• Sill-Flow must be installed over a level framed sill.

• Sill-Flow is not a substitution for metal sill pan.

• This product is not to be considered as a waterproofing product, it does not have any waterproofing characteristics or capabilities.

• Sill-Flow is not designed to correct framing errors.

• Not recommended for permanent exterior exposure.

AVAILABLITY and COST:
Sill-Flow is available through building material dealers. Prices vary with quantity and packaging. Quotations are made on request.

ADVANTAGES:

• Sill-Flow prevents negative water migration and avoids standing water that may collect on sill pan.

• Dimensionally stable, uniform, water resistant and non absorptive.

LIFETIME WARRANTY:

• Sill-Flow products are warranted to be free of defects in manufacture for life. Material will be provided at no charge to replace any proven defective product.

• The dollar value of Sill-Flow's liability and buyer's remedy under this lifetime warranty shall not exceed the purchase price of the material in question.

TECHNICAL SERVICES:

Technical assistance can be obtained by contacting:

SILL-FLOW

4335 Van Nuys Blvd. Ste 226

Sherman Oaks, CA 91403

(310) 747-4322

PRODUCT DESCRIPTION:
Sill-Flow NL (w/o Lip) is an extruded, closed cell polyethylene foam wedge profile (see diagram) specifically designed for use in metal sill pan flashing assembly.

Basic Uses:
To assist with the flow of water by providing a sloped substrate at sills of door and window openings when used in conjunction with waterproofing membrane and metal sill pan.

Color: White and Black

Sizes:
   Sill-Flow NL X2

• 5" wide, 84" long

• 5" wide, 54" long

• 6" wide, 84" long

• 6" wide, 54" long

• 2 lbs. Density

Sill-Flow NL X4

• 5" wide, 84" long

• 5" wide, 54" long

• 6" wide, 84" long

• 6" wide, 54" long

• 4 lbs. Density

INSTALLATION:
Sill-Flow may be installed on the sills of the openings by using low-solvent construction adhesive or secured by screws or nails.

When the window setting depth is >5" align the thick edge of Sill-Flow with the interior plane of the window frame. If the window setting depth is <5", align the thin edge of Sill-Flow with the exterior plane of the drainage plane.

Staple, tack or bond Sill-Flow in place. Travel tack aerosol adhesive may be used to bond in place. Sill-Flow pieces may be butted together in an installation as long as the cuts are straight.

Subsequently waterproofing sheet membrane and metal sill pan may be installed over Sill-Flow.

For window settings of 5" depth, Sill-Flow protruding beyond the interior plane of the window setting may be trimmed off with a sharp utility knife after installation of the metal sill pan.

LIMITATIONS:

• Sill-Flow must be installed over a level framed sill.

• Sill-Flow is not a substitution for metal sill pan.

• This product is not to be considered as a waterproofing product, it does not have any waterproofing characteristics or capabilities.

• Sill-Flow is not designed to correct framing errors.

• Not recommended for permanent exterior exposure.

AVAILABLITY and COST:
Sill-Flow is available through building material dealers. Prices vary with quantity and packaging. Quotations are made on request.

ADVANTAGES:

• Sill-Flow prevents negative water migration and avoids standing water that may collect on sill pan.

• Dimensionally stable, uniform, water resistant and non absorptive.

LIFETIME WARRANTY:

• Sill-Flow products are warranted to be free of defects in manufacture for life. Material will be provided at no charge to replace any proven defective product.

• The dollar value of Sill-Flow's liability and buyer's remedy under this lifetime warranty shall not exceed the purchase price of the material in question.

TECHNICAL SERVICES:

Technical assistance can be obtained by contacting:

SILL-FLOW

4335 Van Nuys Blvd. Ste 226

Sherman Oaks, CA 91403

(310) 747-4322

PRODUCT DESCRIPTION:
Sill-Flow LP-NL (Low Profile w/o Lip) is an extruded, closed cell polyethylene foam wedge (see diagram) specifically designed for use in metal sill pan flashing assembly.

Sill-Flow provides a positive sloped substrate at sills of door and window openings.

Basic Uses:
To assist with the flow of water by providing a sloped substrate at sills of door and window openings when used in conjunction with waterproofing membrane and metal sill pan.

Color: White and Black

Commercial Sizes:
   Sill-Flow LP-NL X2

• 5" wide, 84" long

• 5" wide, 54" long

• 6" wide, 84" long

• 6" wide, 54" long

• 2 lbs. Density

Sill-Flow LP-NL X4

• 5" wide, 84" long

• 5" wide, 54" long

• 6" wide, 84" long

• 6" wide, 54" long

• 4 lbs. Density

INSTALLATION:
Sill-Flow may be installed on the sills of the openings by using low-solvent construction adhesive or secured by screws or nails.

When the window setting depth is >5" align the thick edge of Sill-Flow with the interior plane of the window frame. If the window setting depth is <5", align the thin edge of Sill-Flow with the exterior plane of the drainage plane.

Staple, tack or bond Sill-Flow in place. Travel tack aerosol adhesive may be used to bond in place. Sill-Flow pieces may be butted together in an installation as long as the cuts are straight.

Subsequently waterproofing sheet membrane and metal sill pan may be installed over Sill-Flow.

For window settings of 5" depth, Sill-Flow protruding beyond the interior plane of the window setting may be trimmed off with a sharp utility knife after installation of the metal sill pan.

LIMITATIONS:

• Sill-Flow must be installed over a level framed sill.

• Sill-Flow is not a substitution for metal sill pan.

• This product is not to be considered as a waterproofing product, it does not have any waterproofing characteristics or capabilities.

• Sill-Flow is not designed to correct framing errors.

• Not recommended for permanent exterior exposure.

AVAILABLITY and COST:
Sill-Flow is available through building material dealers. Prices vary with quantity and packaging. Quotations are made on request.

ADVANTAGES:

• Sill-Flow prevents negative water migration and avoids standing water that may collect on sill pan.

• Dimensionally stable, uniform, water resistant and non absorptive.

LIFETIME WARRANTY:

• Sill-Flow products are warranted to be free of defects in manufacture for life. Material will be provided at no charge to replace any proven defective product.

• The dollar value of Sill-Flow's liability and buyer's remedy under this lifetime warranty shall not exceed the purchase price of the material in question.

TECHNICAL SERVICES:

Technical assistance can be obtained by contacting:

SILL-FLOW

4335 Van Nuys Blvd. Ste 226

Sherman Oaks, CA 91403

(310) 747-4322